Completion & service tools
Tools that run inside the well during completion, stimulation and isolation.
- Gravel-pack completion tools
- Hydraulic production packers
- Bridge plugs and casing scrapers
- Tubing hanger and spool assemblies
Manufacturer and repair specialist
Wellhead & completion equipment built to rated pressure.
We forge, machine and pressure-test flow-control and completion tools for oil and gas operators, with EN 10204 3.1 material certificates. Manufacturing and repair from our workshop in Chhatral, Gujarat, with service teams that work at your site.
20,000PSIMaximum rated working pressure
30INSpools and adapter flanges, up to 20,000 PSI
H2SSour-service material classes
EN 102043.1Material certificate with every shipment
What we make
Capabilities
Three lines of work, one workshop. Each product is inspected, tested and documented before it leaves us.
Wellhead & pressure control
Equipment made to API 6A and 16A dimensions and pressure ratings, for wellheads, manifolds and BOP systems.
- Flanges, spools and DSAF
- Studded tees and crosses
- Ring joint gaskets (RTJ)
- Manifold and integral fittings
Flow-line & well-service
Connections, lines and valves for pumping, testing and well-service operations.
- Hammer unions, Fig 50 to YH-300
- Swivel joints and steel hoses
- Pup joints and adapters
- Plug and check valves
Product range
Find a product
Search or filter the range, then add items to your enquiry. Sizes, ratings and dimensions are in the catalog; we confirm the exact specification with each quotation.
Gravel-pack completion tools
Over-the-top packer, Kelly tool and crossover for slurry placement in gravel-pack completions.
5-1/2" hydraulic packer
Retrievable production packer, set by tubing pressure. Bi-directional slips and three-element packing.
5-1/2" bridge plug
Permanent or temporary zonal isolation. Nitrile/HNBR elements, drill-out slips.
5-1/2" casing scraper
Heavy-duty 360-degree scraper for cement scale, burrs, mud cake and rust before completion.
Tubing hanger & spool assembly
Suspends production tubing and seals the annulus. Dual-seal packing stack.
Wellhead flanges
Weld neck, blind, adapter and companion flanges to API 6A dimensions. Standard and H2S service.
Spools & DSAF
Drilling, spacer and adapter spools to API 6A / 16A dimensions, integral and welded construction.
Studded tees & crosses
Flow-control blocks to API 6A dimensions for wellhead and manifold service.
Ring joint gaskets (RTJ)
R, RX and BX styles to API 6A and ASME B16.20 dimensions. Octagonal and oval.
Manifold & integral fittings
Forged elbows, tees and crosses with hammer-union ends. Full traceability.
Choke & kill manifolds
Sizes 2-1/16" to 5", rated up to 15,000 PSI. Build and repair.
Hammer unions
Fig 50 to YH-300. 500 to 20,000 PSI cold working pressure, standard and sour service.
Adapters & crossovers
Forged hammer-union end adapters and crossovers in standard sizes.
Swivel joints
Short-radius (6,000 PSI) and long-sweep tri-race (10,000 to 20,000 PSI) swivels.
Steel hoses & pup joints
Flexible high-pressure hoses with swivel and union ends. Integral pup joints.
Plug & check valves
High-pressure, low-torque plug valves and wing-check valves for portable service.
Services
Repair & on-site service
Keep your equipment in service. Our engineers and technicians can do most of this work at your location, which cuts downtime and transport.
01
Repair & refurbishment
Gate valves, plug valves, regulator valves and choke-and-kill manifolds from 2-1/16" to 5", up to 15,000 PSI.
02
Testing & inspection
Hydrostatic and PR-1 / PR-2 testing, with NDE and dimensional checks on every unit.
03
Custom manufacturing
Products built to your drawing or to our existing design, including tooling for specific jobs.
04
Forging & heat treatment
Open- and closed-die forgings with in-house heat treatment for consistent hardness.
05
BOP control units
Inspection, testing, repair and upgrade to the requirements of API 16D, API RP 16E and API RP 53.
06
On-site service
Engineers and technicians travel to your rig, yard or field location.
Inspected. Tested. Documented.
- NDE
- Hydrostatic test
- EN 10204 3.1
- API 6A / 16A dimensions
- NACE MR0175 / ISO 15156
Enquiry
Request a quotation
Add products from the range, enter the quantity and your details, then send the enquiry on WhatsApp or by email. Our team replies with a quotation.
Your enquiry
0 items
Standards
Specifications we make to
Ratings are cold working pressure unless stated. Dimensions are approximate; we supply certified drawings for installation planning.
API
API 6A & 16A
Dimensions, pressure ratings, temperature classes and material classes for wellhead and christmas-tree equipment.
ASME
ASME B16.20
Metallic ring joint gaskets for flanges.
NACE
MR0175 / ISO 15156
Materials for sour (H2S) service.
EN
EN 10204 3.1
Material certificate supplied with shipments.
API Monogram. NMT is not an API licensee and does not apply the API Monogram. Products are made to the dimensions, pressure ratings and test pressures in the API standards listed here, inspected in-house and supplied with EN 10204 3.1 material certificates. Third-party inspection by an agency of your choice can be arranged. NMT is working towards API licensing.
Contact
Talk to our team
Sales & enquiries
Parth Panchal, Manager
+91 99795 46493
Atul Panchal
+91 98257 11144
nmtoilfield@gmail.com
Workshop
Plot No. E-33, Yogeshwar Estate
B/H Shivam Estate, Chhatral GIDC Phase-2
Chhatral, Dist. Gandhinagar
Gujarat 382729, India
GSTIN 24AALCN1623N1ZA